xDrip+ Bluetooth Settings to work with Libre 1 / 2

Note: I copied the info below, and owe many thanks to, Sérgio Silva (https://www.facebook.com/parapenT1sta). He posted this on the Bubblan.org Facebook page. I copied it here for those who do not have a Facebook subscription. See https://www.facebook.com/groups/Bubblan.org/posts/2164199537060102 for the original post.

xDrip+ Bluetooth Settings to work with Libre 1 / 2.

(also works with MiaoMiao and Blucon)
Make sure you are using the latest version: https://github.com/NightscoutFoundation/xDrip/releases
To work properly with Libre 2 you MUST update your Bubble to the latest firmware using Diabox: https://github.com/bubbledevteam/diabox/releases
If you already have xDrip installed, you can set up it to get the latest version following this tutorial: https://github.com/NightscoutFoundation/xDrip/wiki/How-to-get-the-Nightlies-on-Automatic-Update

Settings on xDrip+

Menu - Settings - Less Common Settings - Bluetooth Settings
Enable:
  • Turn On Bluetooth
  • Bluetooth Watchdog
  • Use Scanning
  • Trust Auto-Connect (ONLY enable it if you DON'T have a Samsung smartphone, for Samsung phone this option has to be DISABLED)
  • Use Background Scans
  • xBrigde+ Polling Mode
  • Allow blucon unbonding
Disable:
  • G5 Bluetooth Watchdog
  • Close Gatt on BLE Disconnect
  • Bluetooth WakeLocks
  • Constantly reset Bluetooth
  • Transmitter PL Support
  • RFDUINO Support
Another suggestions that can help you a lot:
  • Enable GPS Location on your smartphone, never turn it off and set it as High Accuracy mode.
  • Make sure that you give all permissions to xDrip in Android App Settings.
  • Make sure that you don't have xDrip running on Battery Optimization Mode. Check Battery Option in Android Battery Settings.

Reacties

Een reactie posten

Populaire posts van deze blog

Glucose levels on a smartwatch without a phone nearby (Freestyle Libre 2 + Bubble Mini + Samsung Galaxy watch 4)

Afbeelding
  I started using the Freestyle Libre 1 in July 2020, I switched to Libre 2 in April 2021. I was very happy with the alarms, but over time became annoyed by carrying around several devices. Because of the Bluetooth and NFC capabilities of the Libre sensors, I wondered: What if I had a watch with Bluetooth and/or NFC? It would eliminate the need to drag around a phone or reader, everywhere I go. After weeks of trial, error and endless web browsing, I have found myself a set-up that works. This is what it looks like:                     With my current set-up, I can always use the Libre 2 reader as a back-up, to scan the sensor and receive the high and low alarms. This is very important to me, because apps and bluetooth can fail to connect, often for unknown reasons. Below, you will find the steps I followed. Reading guide: If you just want to get readings from Freestyle Libre 2 sensors (on phone, and perhaps forward the readi...
Meer lezen

Troubleshooting issues with xDrip+ and Bubble Mini

Afbeelding
Always keep location (GPS) on phone or watch turned on! Without it, bluetooth will likely NOT function or (re)connect. This may seem ridiculous and unnecessary, because that's what it is. In 2019, Android (read: Google) made it mandatory for any app to have location permission in order to work with Bluetooth devices. This is an abomination and drains battery, but cannot really be avoided.   Placing Bubble Mini on sensor Don't stick the Bubble to the sensor with adhesive, only to skin. This way, the Bubble may be less securely connected, but if sticked to the sensor, the Bubble causes additional friction and pull and the Libre sensor will likely fall of before the 14-day lifetime of the sensor. The Bubble may fall of once every few days, but is easily reattached. A sensor that comes loose from skin cannot be used anymore.  Manually check whether Bubble is positioned correctly over the sensor, before sticking it to skin. Before sticking the Bubble Mini to skin, it is best to fi...
Meer lezen